Cisco Cisco Evolved Programmable Network Manager 1.2 Developer's Guide
RESTCONF/YANG
Interface Details
Cisco EPNM RESTConf NBI Guide
297
add/drop multiplexers. Dynamic (3) Created by request from a
control plane (e.g. from GMPLS signalling). protection(4) Created
to include the second of a pair of protected interfaces in a cross-
connect, when a cross-connect entry for the first interface in the
pair is being created. Such an entry cannot be deleted directly. It is
deleted when the cross-connect entry containing the other
interface(s) of the protected pair(s) is deleted.
control plane (e.g. from GMPLS signalling). protection(4) Created
to include the second of a pair of protected interfaces in a cross-
connect, when a cross-connect entry for the first interface in the
pair is being created. Such an entry cannot be deleted directly. It is
deleted when the cross-connect entry containing the other
interface(s) of the protected pair(s) is deleted.
creationTime
datetime
The value of MIB II's sysUpTime object at the time this bi-
directional cross-connect was created. If the current state was
entered prior to the last re-initialization of the agent then this
object contains a zero value.
directional cross-connect was created. If the current state was
entered prior to the last re-initialization of the agent then this
object contains a zero value.
description
String
An optional description of the entity.
direction
DirectionEnum
Specifies the direction of the information flow.
fdn
String
The fully qualified domain name (FDN) for the equipment (or
equipment subclass) instance.
equipment subclass) instance.
forwardingMode
ForwardingModeEn
um
um
Specifies whether the traffic flow through this FR is based on an
established connection or is connectionless.
established connection or is connectionless.
name
String
The name of the entity.
operStatus
IfOperStatusEnum
-
owningEntityId
String
## Internal use only ##
secondaryState
OpticalSecondarySt
ateEnum
ateEnum
-
serviceState
String
-
subclassname
String
The name of the object type.
switchType
OpticalCrossConnec
tionSwitchTypeEnu
m
tionSwitchTypeEnu
m
This object specifies the type of switching element used to
implement this cross-connect. The value 'opticalCrossConnect'
applies only when there is no optical-to-electrical conversion
performed to implement the cross-connect. The value 'autoSelect'
indicates the agent should figure out the switch type to use. The
value 'autoSelect' is a write-only value and should never be
returned when this object is read. If the manager activates the row
before setting this object, the value may be chosen by the agent.
implement this cross-connect. The value 'opticalCrossConnect'
applies only when there is no optical-to-electrical conversion
performed to implement the cross-connect. The value 'autoSelect'
indicates the agent should figure out the switch type to use. The
value 'autoSelect' is a write-only value and should never be
returned when this object is read. If the manager activates the row
before setting this object, the value may be chosen by the agent.
topology
FRTopologyTypeEnu
m
m
Represents the type of topology for this FR (point-to-point, point-
to-multipoint, and so on).
to-multipoint, and so on).
transportAdminState
String
-
forwardingRelationsh
ipEnd *
ipEnd *
Set<ForwardingRela
tionshipEnd>
tionshipEnd>
The set of instances of ProtocolEndpoint subclasses for this
instance of FREnd (it is one side of the association class).
instance of FREnd (it is one side of the association class).
Operations
The table below lists the operations available to retrieve OpticalCrossConnection data from
RESTCONF via the http protocol.
All URLs require basic authentication and can produce:
RESTCONF via the http protocol.
All URLs require basic authentication and can produce:
application/xml
application/yang.data+xml
application/json
application/yang.data+json