Cisco Cisco Evolved Programmable Network Manager 2.0 Developer's Guide
MTOSI Interface Details
Cisco EPN Manager 2.0.2 MTOSI API Guide for OSS Integration
115
NOTE:
1.
For creating a breakout, the parent controller’s portMode attribute should be set to BREAKOUT
with framing, mapping, rate set to NONE and bitrate set to 0.
2.
The individual lanes can be configured by specifying the values other than NONE for portMode,
framing, mapping, and rate.
3.
A Breakout Lane can be removed by specifying NONE for portMode, framing, mapping, rate,
and bitrate as 0 with the lane number indicating the Lane to be un-configured/removed. This
can also be achieved by setting the LaneNumber and the portMode to NONE. The other
parameters for the lane are not required.
4.
For resetting the breakout configuration:
a. A user has to set the parent controller’s portMode, framing, mapping, and rate to
NONE and bitrate to 0. This will remove the breakout configuration on the parent
controller and all the associated lanes.
b. The regular portMode configuration can be applied on a parent controller by specifying
the required values for portMode, mapping, framing, rate, and bitrate.
4.16.1.1.3 Output
4.16.1.1.4 Exceptions
internalError: Indicates that an internal error or exception has occurred as part of this call.
invalidInput: Indicates that the input given to the operation is invalid.
notImplemented: Indicates that the operation is not implemented by the management system.
perfMon
String
DISABLED, ENABLED
signalDegradeBert
String
Signal degrade BER threshold - E_3, E4, E_5, D_6, E_7,
E_8. E_9
signalFailureBert
String
Signal failure BER threshold - E_3, E4, E_5, D_6, E_7,
E_8. E_9
ttiSent
String
Free format string.
ttiExpected
String
Free format string.
ttiDapiSent
String
Free format string.
ttiDapiExpected
String
Free format string.
ttiSapiSent
String
Free format string.
ttiSapiExpected
String
Free format string.
ttiOperatorSent
String
Free format string.
ttiOperatorExpected
String
Free format string.
Termination Point
Data
Data Type
Description
setTerminationPoint
DataResponse
Holder element that contains the Termination Point
Data.
modifiedTp
TerminationPointDataTy
pe
The complex element containing the Termination Point
which was modified.
Name
NamingAttribute
FDN of the TP (RDN sequence containing MD, ME, and
TP).
discoveredName
String
Name of the TP.
VendorExtensions
ciscoAlarmExtension
Contains Cisco specific Vendor Extensions
ciscoPtpExtension
CiscoPtpExtension
Vendor Extension data containing the attributes
supported by the Termination Point (described in the
Supported Parameter Name and Value table).