Cisco Cisco Evolved Programmable Network Manager 2.0 Developer's Guide
MTOSI Interface Details
Cisco EPN Manager 2.0.3 MTOSI API Guide for OSS Integration
91
The following table lists the containers for Fault Management map entries applicable to different types of
fault management maps:
fault management maps:
Carrier
Ethernet
Service Order
Data
Ethernet
Service Order
Data
Data Type
Applicable
to Service
Type
to Service
Type
Description
Fault
Management
Map Data
Management
Map Data
FaultMana
gementMa
pType
gementMa
pType
Container for Fault Management Map Entries
entry
FaultMana
gementMa
pEntryType
gementMa
pEntryType
Zero or more elements of the
FaultManagementMapEntryType.
FaultManagementMapEntryType.
Fault
Management
Map Entry
Data
Management
Map Entry
Data
FaultMana
gementMa
pEntryType
gementMa
pEntryType
All
Container of the entries for Fault Management Map
From
String
All
Value should be one of - ENNI Z, UNI Z, UNI A, ENNI A.
The source of the traffic flow across the EVC/OVC.
The source of the traffic flow across the EVC/OVC.
To
String
All
Value should be one of - ENNI Z, UNI Z, UNI A, ENNI A.
The destination of the traffic flow across the EVC/OVC.
The destination of the traffic flow across the EVC/OVC.
CoS
String
All
Values:
EXTRA HIGH
HIGH
HIGHEST AVAILABLE
LOW
MEDIUM
The Class of Service identifier that should be associated with
the frame.
EXTRA HIGH
HIGH
HIGHEST AVAILABLE
LOW
MEDIUM
The Class of Service identifier that should be associated with
the frame.
OAMProfile
String
All
Provide a name to the profile that can be identified for the set
of OAM attributes that should be applied to the frame to
enable performance monitoring.
Note: This is just a label. The actual values should be passed
through CChk, SEDM, DEDM, SyLM elements mentioned below.
For example,
– Performance Monitoring 1: Enables continuity check and
synthetic loss measurement. (CChk=Yes, SEDM= No, DEDM=No,
SyLM=Yes, SLM=No).
– Performance Monitoring 2: Enables continuity check,
synthetic loss measurement, and single-ended delay
measurement (CChk=Yes, SEDM= Yes, DEDM=No, SyLM=Yes,
SLM=No).
– Performance Monitoring 3: Enables continuity check,
synthetic loss measurement, and dual-ended delay
measurement (CChk=Yes, SEDM= No, DEDM=Yes, SyLM=Yes,
SLM=No).
of OAM attributes that should be applied to the frame to
enable performance monitoring.
Note: This is just a label. The actual values should be passed
through CChk, SEDM, DEDM, SyLM elements mentioned below.
For example,
– Performance Monitoring 1: Enables continuity check and
synthetic loss measurement. (CChk=Yes, SEDM= No, DEDM=No,
SyLM=Yes, SLM=No).
– Performance Monitoring 2: Enables continuity check,
synthetic loss measurement, and single-ended delay
measurement (CChk=Yes, SEDM= Yes, DEDM=No, SyLM=Yes,
SLM=No).
– Performance Monitoring 3: Enables continuity check,
synthetic loss measurement, and dual-ended delay
measurement (CChk=Yes, SEDM= No, DEDM=Yes, SyLM=Yes,
SLM=No).
CChk
String
All
Value=Yes
Enables continuity checks between source and destination.
Continuity checks are always enabled.
Always set to yes.
Enables continuity checks between source and destination.
Continuity checks are always enabled.
Always set to yes.