Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
189
• transmissionParameters::LayerRate_T layerRate
– Supported for CTPs only.
• globaldefs::NVSList_T additionalInfo
– Not supported.
Throws
Compliance
TMF-defined.
TMF-defined.
3.7.2 performMaintenanceOperation
Synopsis
Description
This interface enables the NMS to operate and release the maintenance commands that are supported by a
TP.
ONS 15310 CL and ONS 15310 MA
Prime Optical supports only terminal and facility loopback operations for electrical and OC-n PTPs.
Prime Optical does not support loopback operations for CTPs.
ONS 15327
Prime Optical supports only terminal and facility loopback operations for DS-n and OC-n PTPs.
Prime Optical does not support loopback operations for CTPs.
For the ONS 15327 R3.4 or later, the loopback state can be set only if the TP state is either Out of
Service–Maintenance or Auto in Service.
ONS 15454 SDH
Prime Optical supports only terminal and facility loopback operations for PTPs.
Prime Optical does not support loopback operations for CTPs.
For the ONS 15454 SDH R3.4 or later, the loopback state can be set only if the TP state is either Out of
Service–Maintenance or Auto in Service.
ONS NCS2000 SDH
Prime Optical supports only terminal and facility loopback operations for PTPs.
Prime Optical does not support loopback operations for CTPs.
The loopback state can be set only if the TP state is either Out of Service–Maintenance or Auto in
Service.
ONS 15454 SONET
This interface enables the NMS to operate and release the maintenance commands that are supported by a
TP.
ONS 15310 CL and ONS 15310 MA
Prime Optical supports only terminal and facility loopback operations for electrical and OC-n PTPs.
Prime Optical does not support loopback operations for CTPs.
ONS 15327
Prime Optical supports only terminal and facility loopback operations for DS-n and OC-n PTPs.
Prime Optical does not support loopback operations for CTPs.
For the ONS 15327 R3.4 or later, the loopback state can be set only if the TP state is either Out of
Service–Maintenance or Auto in Service.
ONS 15454 SDH
Prime Optical supports only terminal and facility loopback operations for PTPs.
Prime Optical does not support loopback operations for CTPs.
For the ONS 15454 SDH R3.4 or later, the loopback state can be set only if the TP state is either Out of
Service–Maintenance or Auto in Service.
ONS NCS2000 SDH
Prime Optical supports only terminal and facility loopback operations for PTPs.
Prime Optical does not support loopback operations for CTPs.
The loopback state can be set only if the TP state is either Out of Service–Maintenance or Auto in
Service.
ONS 15454 SONET