Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
242
path for a 1+1, 2-fiber BLSR, or 4-fiber BLSR protected SNC. Prime Optical reports topological links
and CTPs/FTPs of both the working and protect paths for a path-protection SNC. An SNC with the source
or destination on Ethernet equipment is also supported.
and CTPs/FTPs of both the working and protect paths for a path-protection SNC. An SNC with the source
or destination on Ethernet equipment is also supported.
• For the ONS 15310, this method does not report STS-1 SNC on CTX using DS1 ports.
• For the ONS 15327, this method does not report STS-1 SNC on XTC using DS1 ports.
• For the ONS 15454 SONET, this method does not report STS-1 SNC on DS1 equipment.
• For the ONS 15454 SDH, this method does not report VC-4 SNC on E1 or E1_42 equipment.
• For CPT 200, CPT 200 SDH, CPT 600, and CPT 600 SDH, see Chapter 4, “Using
• For the ONS 15327, this method does not report STS-1 SNC on XTC using DS1 ports.
• For the ONS 15454 SONET, this method does not report STS-1 SNC on DS1 equipment.
• For the ONS 15454 SDH, this method does not report VC-4 SNC on E1 or E1_42 equipment.
• For CPT 200, CPT 200 SDH, CPT 600, and CPT 600 SDH, see Chapter 4, “Using
GateWay/CORBA Connectionless Interfaces” for supported CTPs and links.
This interface does not report VCAT SNCs.
The lists are unordered for circuits for which:
The lists are unordered for circuits for which:
• The circuit state is not active.
• The circuit has DRI protection.
• The circuit has DRI protection.
A processing failure exception is returned with an EXCPT_UNABLE_TO_COMPLY exception in all of
the preceding conditions.
Parameters
the preceding conditions.
Parameters
Name
Type
Input/
Output
Output
Description
sncName globaldefs::NamingAttributes_T
In
Name of the subnetwork
connection.
connection.
ctpList
terminationPoint::TerminationPointList_T Out
Ordered list of CTP/FTPs for this
SNC.
SNC.
topoList
topologicalLink::TopologicalLinkList_T
Out
Ordered topological links through
which this SNC traverses.
which this SNC traverses.
For details about the TerminationPoint_T structure, see
For details about the TopologicalLink_T structure, see
Throws
Compliance
Prime Optical-defined.
Note:
The och-cc circuit from now on will report src/dst ctps, the ott link and all ctps that belong to ott link.
That means that to obntain the same route as before, the end user must perform almost 3 calls the first to
get the ochcc ochtails relationship, the second to get the ochcc route an then from ochtail circuit get the
trails route
3.9.13 getSNC
Prime Optical-defined.
Note:
The och-cc circuit from now on will report src/dst ctps, the ott link and all ctps that belong to ott link.
That means that to obntain the same route as before, the end user must perform almost 3 calls the first to
get the ochcc ochtails relationship, the second to get the ochcc route an then from ochtail circuit get the
trails route
3.9.13 getSNC