Cisco Cisco Prime Central 1.2 Leaflet
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Problem
Solution
Introduction
This document describes a step by step procedure to replace nco_g_oracle process with
nco_g_jdbc in Prime Central 1.4 and later releases.
nco_g_jdbc in Prime Central 1.4 and later releases.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Prime Central
●
Basic Linux Operating System (OS) commands
●
Components Used
The information in this document is based on these software and hardware versions:
Prime Central 1.4 and above
●
Oracle database
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Background Information
After Prime Central upgrades from any lower version to Prime Central 1.4 and later releases, at
few instances you observe that nco_g_oracle process still runs instead of nco_g_jdbc process.
few instances you observe that nco_g_oracle process still runs instead of nco_g_jdbc process.
Default behaviour of upgrade process to Prime Central 1.4 and later release includes replacement
of nco_g_oracle by nco_g_jdbc process.
of nco_g_oracle by nco_g_jdbc process.
Problem
Prime Central G_JDBC.log throws this error message that indicates the issue
wherein nco_g_oracle process still runs post Prime Central 1.4 and later releases sucessfull
wherein nco_g_oracle process still runs post Prime Central 1.4 and later releases sucessfull