Cisco Cisco Prime Central 1.2 Installation Guide
48
Integrating Prime Performance Manager with Prime Central
Tip
Integrate Prime Performance Manager with Prime Central after you integrate the Fault Management component and
each instance of Prime Network with Prime Central.
each instance of Prime Network with Prime Central.
Step 1
As the root user, log into the Prime Performance Manager gateway server and navigate to the
Prime-Performance-Manager-gateway-installation-directory/bin directory.
Prime-Performance-Manager-gateway-installation-directory/bin directory.
Step 2
Enter:
./ppm primecentralintegration
Step 3
Enter the appropriate responses at the prompts:
•
Database Host—Enter the Prime Central database server hostname or IP address.
•
Database SID [primedb]—Enter the Prime Central database service name, which is primedb by default.
•
Database User [primedba]—Enter the Prime Central database username, which is primedba by default.
•
Database Password [*****]—Enter the Prime Central database user password; for example, Test456@.
•
Database Port [1521]—Enter the Prime Central database port number, which is 1521 by default.
Step 4
Restart Prime Performance Manager for the changes to take effect.
Step 5
As the primeusr user, log into the Prime Central integration layer and restart it:
a.
Enter the following command, which lists all integration layer instances (and their profiles) that are running:
itgctl list
b.
Note down the ID of the integration layer instance with the “PC-IL-CORE” profile.
c.
Stop the PC-IL-CORE profile instance:
itgctl stop
ID
d.
Restart the integration layer:
itgctl start
ID
Step 6
If you are reintegrating Prime Performance Manager after a previous integration, you must unregister it from
Prime Central before you reintegrate it. See
Prime Central before you reintegrate it. See
Step 7
After Prime Performance Manager is integrated with Prime Central, use the Prime Central portal to create new users.
(Any users that existed before the integration are removed during the integration.)
(Any users that existed before the integration are removed during the integration.)
Step 8
If you install a Prime Network instance after Prime Performance Manager is integrated with Prime Central, enter the
following commands to integrate Prime Performance Manager with Prime Network:
following commands to integrate Prime Performance Manager with Prime Network:
/opt/CSCOppm-gw/bin/sgmInventoryImportUtility.sh -installCrossLaunchPoints
/opt/CSCOppm-gw/bin/sgmInventoryImportUtility.sh -installTrapSupport
Step 9
If Prime Performance Manager is configured to send alarms directly to the Prime Central Fault Management server,
verify that an upstream OSS host is configured correctly in the System Event Editor of Prime Performance Manager.
verify that an upstream OSS host is configured correctly in the System Event Editor of Prime Performance Manager.