Cisco Cisco Multicast Manager 3.4 Information Guide

Cisco Systems, Inc.
www.cisco.com

Device Instrumentation Requirements for Cisco
Multicast Manager, 3.4

September 18, 2014

The functionality provided by Cisco Multicast Manager depends on the MIB and CLI commands listed
in this document. In addition, this document lists video probes that are supported by CMM 3.4.

Any device (Cisco or non-Cisco) that supports the mandatory MIBs and CLI commands might be
supported by CMM.

Contents

This document contains the following sections:

•

Contents, page 1

•

Supported MIBs, page 2

•

Video Probe Support, page 4

•

CLI Support, page 6

This document contains the following tables:

•

Table 1: MIBs Supported on Layer 2 and Layer 3 Devices Used with CMM

•

Table 2: MIBs Supported on Layer 2 Devices Used with CMM

•

Table 3: MIBs Supported on Layer 3 Devices Used with CMM

•

Table 4

Video Probes Supported by Cisco Multicast Manager

•

Table 5

CMM Functionality Requiring Telnet or SSH Access

•

Table 6: CLI Commands Used by CMM—Command Descriptions