Cisco Cisco Multicast Manager 3.3 Information Guide
2
Device Instrumentation Requirements for Cisco Multicast Manager, 3.3.2
OL-23601-03
Supported MIBs
Table 1
MIBs Supported on Layer 2 and Layer 3 Devices Used with CMM
MIB
Description
SNMPv2-MIB
Main SNMPv2 MIB.
SNMPv2-SMI
SNMPv2 Structure of Management Information MIB.
CISCO-SMI
The Structure of Management Information for the Cisco enterprise.
ENTITY-MIB
MIB module for representing multiple logical entities supported by a single
SNMP agent, such as hardware components on a device.
SNMP agent, such as hardware components on a device.
CISCO-CAR-MIB
MIB used to implement Cisco Weighted Rate-Limit, known as Committed
Access Rate (CAR). CAR is a traffic control method that uses a set of rate limits
to be applied to an interface for packet switching purposes. Each rate limit has
a configurable action to be taken when a condition is met.
Access Rate (CAR). CAR is a traffic control method that uses a set of rate limits
to be applied to an interface for packet switching purposes. Each rate limit has
a configurable action to be taken when a condition is met.
CISCO-QUEUE-MIB
MIB module for objects used to manage interface queuing in Cisco devices
CISCO-CLASS-BASED-QOS-MIB
MIB that provides read access to Quality of Service (QoS) configuration and
statistics information for Cisco platforms that support the Modular Quality of
Service Command-line Interface (Modular QoS CLI).
statistics information for Cisco platforms that support the Modular Quality of
Service Command-line Interface (Modular QoS CLI).
CISCO-QOS-POLICY-CONFIG-MIB Defines
managed objects that support the policy source configuration of Quality
of Service (QoS) on the device.
CISCO-CDP-MIB
MIB module for management of the Cisco Discovery Protocol in Cisco devices.
IF-MIB
Describes generic objects for network interface sub-layers. This MIB is an
updated version of MIB-II's ifTable, and incorporates the extensions defined in
RFC 1229.
updated version of MIB-II's ifTable, and incorporates the extensions defined in
RFC 1229.
ETHERLIKE-MIB
Describes generic objects for ethernet-like network interfaces.
OLD-CISCO-SYS-MIB
A MIB that is used as a replacement for the four separate system MIBs
(OLD-CISCO-CPU.my, OLD-CISCO-ENVMON-MIB.my,
OLD-CISCO-MEMORY-MIB.my, OLD-CISCO-SYSTEM-MIB.my) in test
tool environments.
(OLD-CISCO-CPU.my, OLD-CISCO-ENVMON-MIB.my,
OLD-CISCO-MEMORY-MIB.my, OLD-CISCO-SYSTEM-MIB.my) in test
tool environments.
OLD-CISCO-INTERFACES-MIB
A MIB used to monitor older Cisco devices.
CISCO-CONFIG-COPY-MIB
MIB used to facilitate writing of configuration files of an SNMP Agent running
Cisco's IOS in the following ways: to and from the net, copying running
configurations to startup configurations and vice-versa, and copying a
configuration (running or startup) to and from the local IOS file system.
Cisco's IOS in the following ways: to and from the net, copying running
configurations to startup configurations and vice-versa, and copying a
configuration (running or startup) to and from the local IOS file system.
RFC1213-MIB
MIB that defines the second version of the Management Information Base
(MIB-II) for use with network management protocols in TCP/IP-based
internets.
(MIB-II) for use with network management protocols in TCP/IP-based
internets.
Table 2
MIBs Supported on Layer 2 Devices Used with CMM
MIB
Description
CISCO-STACK-MIB
Provides configuration and runtime status for chassis, modules, ports, etc. on
Catalyst systems.
Catalyst systems.
CISCO-CATOS-ACL-QOS-MIB MIB
module
for Access Control Lists (ACLs) configuration of Quality of Service
(QoS) as well as Security feature on the Cisco Catalyst 5000/6000 series switch
running CatOS.
running CatOS.