Cisco Cisco Process Orchestrator 2.X User Guide
22-27
Cisco Tidal Enterprise Orchestrator Reference Guide
OL-24928-01
Chapter 22 Managing Automation Packs
Extracting Data Files
Extracting Data Files
Data files are embedded in some TEO-provided automation packs. By the default, users can extract these
data files during the automation pack import process. However, if the user decides not to extract the files
at that time, they can use the following steps to extract the files in the automation pack to a location on
the computer.
data files during the automation pack import process. However, if the user decides not to extract the files
at that time, they can use the following steps to extract the files in the automation pack to a location on
the computer.
To extract the data files:
Step 1
On the Administration—Automation Packs view, right-click and choose Extract.
The Open dialog box displays the list of available automation packs.
Step 2
Highlight the appropriate automation pack, and then click Open.
The Data Extraction dialog box displays.
Figure 22-21
Data Extraction Dialog Box
Step 3
In the Specify the destination for the extracted to extract data files field, verify the default location for
where the selected files are to be copied.
where the selected files are to be copied.
Note
Click Browse to specify a different location.
Step 4
Check the check box to the left of the appropriate data file to indicate that the data file should be
extracted.
extracted.
Step 5
Click OK.
The files are copied to the selected location.