Cisco Cisco Process Orchestrator 3.1 User Guide
13-156
Cisco Process Orchestrator 3.1 User Guide
Appendix 13 Using Adapters
UCS Software Adapter
Note
The distinguished name should be in the format
org-root/org-TEO_Test/ls-srvprofz1/ether-1-host-eth-2.
org-root/org-TEO_Test/ls-srvprofz1/ether-1-host-eth-2.
•
VLAN name—Click the Browse button to specify the name of the VLAN to be disassociated from
the vNIC.
the vNIC.
Note
The VLAN name should be in the format 123.45.67-Test.
•
Collect XML output—Check this check box if you want the raw XML output to display on the XML
Output instance property page.
Output instance property page.
Step 4
Enter the information in the remaining tabs as necessary, then click Save to complete the activity
definition.
definition.
Defining the Modify UCS VLAN Settings Activity
Step 1
In the Process Editor Toolbox, choose Cisco UCS > Modify UCS VLAN Settings, click the activity and
drag it onto the Workflow pane.
drag it onto the Workflow pane.
Step 2
Click the General tab and enter the required information.
Step 3
Click the VLAN Settings tab to define the properties specific to the activity, including:
•
Service profile distinguished name—Specify the distinguished name for the network card. The
distinguished name should be in the format org-root/ls-C1B1/ether-eth1.
distinguished name should be in the format org-root/ls-C1B1/ether-eth1.
•
Fabric Id—Choose the fabric interconnect associated with the component (A or B) from the
drop-down list.
drop-down list.
•
Enable failover—Check this check box if you want the vNIC to be able to access the second fabric
interconnect if the default fabric interconnect is unavailable.
interconnect if the default fabric interconnect is unavailable.
•
VLAN trunking—Check this check box if you want to use VLAN trunking. If this check box is
checked, you can select more than one VLAN.
checked, you can select more than one VLAN.
•
VLANS—List of selected VLANs to be modified.
•
Native VLAN—Indicates whether the selected VLAN is a native VLAN. Select the VLAN in the
list and check this check box to indicate that it is a native VLAN.
list and check this check box to indicate that it is a native VLAN.
Step 4
Enter the information in the remaining tabs as necessary, then click Save to complete the activity
definition.
definition.
Defining the Reset UCS Server Activity
Step 1
In the Process Editor Toolbox, choose Cisco UCS > Reset UCS Server, click the activity and drag it
onto the Workflow pane.
onto the Workflow pane.
Step 2
Click the General tab and enter the required information.
Step 3
Click the Server tab to define the properties specific to the activity, including: