Cisco Cisco Prime Network Services Controller Adaptor for DFA Troubleshooting Guide

Cisco Dynamic Fabric Automation Production Troubleshooting Guide 
 

 

 

Station:       0002.3d40.6403 

Machine State: [08] VDP_BDG_WAIT_STATION_CMD  

Entry State:   [03] VSI_ASSOCIATE  

Profile ID:    00007927                         

Filter[01]:    group=31015 vlan=1601 mac=0050.56b9.72c6

 

 

 
The keepalive countdown timer on the DFA leaf switch, which is by default approximately 22 minutes, can be modified 
using the evb reinit-keep-alive command: 
 

acorn3(config)# evb reinit-keep-alive ? 

  <22-31>  Timer exponent. (Min 22 exp ~ 40 seconds) 

 

3.6.1  Profile deletion 

 

The HMM process keeps track of the VDP hosts attached to a segment. In the below example, two VDP hosts are at-
tached to the segment 31015: 

Active Host Entries 

flags: L - Locally inserted, V - vPC+ inserted, R - Recovered, X - xlated Vlan 

VNI      VLAN  STATE           FLAGS PROFILE(INSTANCE)  

31015    1601  Profile Active  L     defaultNetworkUniversalEfProfile(instance_vni_31015_15) 

Displaying VDP hosts 

Interface      Encap      Flags State           VSI-ID            

Eth1/26        1601       L     Profile Active  00000000000000007927005056B95942  

Eth1/26        1601       L     Profile Active  00000000000000007927005056B972C6 

 

instance_index 15 

Got Local originated vdp type trigger at 15:36:44  

Sent to Database Manager at 14:48:50  

Received Parameters from Database Manager at 14:48:50  

Displaying parameters for profile defaultNetworkUniversalEfProfile and instance instance_vni_31015_15 

parameter 0: $gatewayIpAddress=10.1.15.1 

parameter 1: $netMaskLength=24 

parameter 2: $vlanId= 

parameter 3: $segmentId=31015 

parameter 4: $vrfName=PineForest:Tree1 

parameter 5: $gatewayIpAddress=10.1.15.1 

parameter 6: $netMaskLength=24 

parameter 7: $dhcpServerAddr=5.0.3.91 

parameter 8: $vrfDhcp=management 

parameter 9: $gatewayIpv6Address= 

parameter 10: $prefixLength= 

parameter 11: $mtuValue= 

parameter 12: $include_vrfSegmentId=50010 

parameter 13: $segmentId=31015 

parameter 14: $vlanId=1601 

parameter 15: $asn=60100 

Got VLAN allocated from vlan manager at 14:48:50  

Sent Apply to Configuration Manager at 14:48:50  

Completed executing all commands at 14:48:51  

Displaying VDP hosts