Cisco Cisco 1 GHz GainStar Node Installation Guide
4042027 Rev A
Installation and Configuration
2-31
Upgrading the Forward Injection Node, Continued
To Upgrade to Full Configuration from Minimum Configuration
Follow these steps to Upgrading the GainStar Forward Injection node Minimum
Configuration to Full Configuration. See illustrations below.
Configuration to Full Configuration. See illustrations below.
1
Open the GainStar Forward Injection Node Lid.
2
Follow the steps in section To Remove or Reinstall the Optical Transmitter
(on page 2-18) to add and remove certain units marked in the above diagram
to install the Reverse transmitter module.
(on page 2-18) to add and remove certain units marked in the above diagram
to install the Reverse transmitter module.