Cisco Cisco 1 GHz GainStar Node Installation Guide
Balancing and Setup
37
Complete the following steps to select the proper reverse equalizer value.
1 Connect the test point probe to the reverse output test point.
1 Connect the test point probe to the reverse output test point.
2 Compare the calculated tilt with the design tilt (on the design print).
3 Is the reverse output tilt within ± 0.5 dB of the design tilt?
3 Is the reverse output tilt within ± 0.5 dB of the design tilt?
If yes, proceed to the next section.
If the output tilt is more than the design tilt, replace the reverse EQ with a