Cisco Compact Reverse Transmitters 9008x with FP, DFB or CWDM Lasers Data Sheet
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 8
Data Sheet
Compact Reverse Transmitters with DFB or CWDM
Lasers
Lasers
Cisco
®
Compact Nodes can be configured with a variety of optical reverse transmitters
to provide flexibility for use in multiple applications. These reverse transmitters are
plug-in modules that deliver a cost-effective, user-friendly solution for upstream
transmission. The Compact Reverse Transmitters (Figure 1) are available with
distributed feedback (DFB) or Coarse Wavelength Division Multiplexing (CWDM)
lasers.
plug-in modules that deliver a cost-effective, user-friendly solution for upstream
transmission. The Compact Reverse Transmitters (Figure 1) are available with
distributed feedback (DFB) or Coarse Wavelength Division Multiplexing (CWDM)
lasers.
All transmitters feature a built-in microprocessor and pilot tone for easy set-up of the reverse path. The pilot tone
does not take up any reverse bandwidth as it is placed at 5 MHz. Moreover, placing the pilot tone at 5 MHz also
makes the reverse transmitter interoperable with virtually all reverse receivers in the marketplace. If there is no
modulation, the pilot tone serves as a quieting tone, which reduces spurious noise and improves overall noise
performance with up to 15 dB. All reverse transmitters have increased gain, which allows low reverse input levels
at the node.
The reverse transmitter can also run in burst mode which makes it possible to deploy Cisco Compact Nodes in a
radio frequency over glass (RFOG) network.
Reverse Transmitters and CWDM
The reverse transmitters (Figure 2) are an integral part of the CWDM transport system making it possible for each
fiber in a hybrid fiber-coaxial (HFC) network to support a sixteen-fold increase in the number of wavelengths
available. The CWDM lasers offer two output powers, 3 dBm and 6 dBm.
Figure 1. Reverse Transmitter