Cisco Cisco 7815I Media Convergence Server Technical Manual
How to Get the ICD Extension to Appear on the
User Page Using CallManager 3.3
User Page Using CallManager 3.3
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Getting the ICD Extension to Appear
Changing the IAQ Flag in DC Directory
Restarting the IIS Admin Service and World Wide Web Publishing Service
Verify
Troubleshoot
Related Information
Introduction
This procedure adds the ICD Extension field to the User pages on the Cisco CallManager Administration
web page.
web page.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on Cisco CallManager 3.3.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make
sure that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make
sure that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the
Cisco Technical Tips Conventions
.
Getting the ICD Extension to Appear
In order to get the ICD Extension field to appear on the User pages of the Cisco CallManager
Administration web page, follow the steps in these sections.
Administration web page, follow the steps in these sections.
Page 1 of 8
Cisco - How to Get the ICD Extension to Appear on the User Page Using CallManager 3.3
7/22/2004
http://kbase:8000/paws/servlet/ViewFile/13956/icd_ext_pdf.xml?convertPaths=1