Cisco PowerKEY CableCARD Module 802 User Guide
Chapter 2 Manage the CableCARD and M-Card Modules
24
4017453 Rev B
3 Use the CableCARD diagnostic screens to locate the CableCARD ID, MAC
Address, and Host ID, or you can record the IDs that display on the host screen
after you insert the CableCARD or M-Card module.
after you insert the CableCARD or M-Card module.
4 Enter the CableCARD ID or the CableCARD MAC address, and then enter the
host ID in the appropriate fields.
Notes:
Notes:
Entering both the CableCARD ID and the CableCARD MAC Address is not
necessary. Entering either one is sufficient as long as the EMM keys for the
CableCARD or M-Card module have been installed.
necessary. Entering either one is sufficient as long as the EMM keys for the
CableCARD or M-Card module have been installed.
The CableCARD MAC Address field is not case-sensitive, but all values
entered into this field are converted to uppercase letters.
entered into this field are converted to uppercase letters.
Do not enter data into the Host MAC Address field.
5 For further details, refer to the DNCS Online Help for specific steps to add a
CableCARD or M-Card module to the DNCS.
Important! After saving the CableCARD or M-Card module on the DNCS, copy
protection information should be displayed on the host within a few minutes. If
it is not, contact Cisco Services for assistance.
Important! After saving the CableCARD or M-Card module on the DNCS, copy
protection information should be displayed on the host within a few minutes. If
it is not, contact Cisco Services for assistance.
6 If you are finished, click Exit All CableCARD Screens to close the CableCARD
window.