Cisco PowerKEY CableCARD Module 802 User Guide
Return CableCARD or M-Card Modules from Service
4014667 Rev C
27
Return CableCARD or M-Card Modules from
Service
When CableCARD or M-Card modules are taken out of service, you need only to
remove the conditional access in order to deauthorize the services on the
CableCARD or M-Card modules. These services may be re-activated when the
CableCARD or M-Card module is returned to service. You can remove the
conditional access using the billing system or the DNCS as described in the
following procedure.
Removing Conditional Access Services from the CableCARD and M-Card
Modules
1 From the DNCS Administrative Console, select the DNCS tab, select the Home
Element Provisioning tab, and then click DHCT. The DHCT Provisioning
window opens.
2 Select the By MAC Address option and type the MAC Address for the
CableCARD or M-Card module.
3 Click Continue. The Set Up DHCT window opens. A CableCARD or M-Card
entry appears in the DHCT Type box.
4 Click the Secure Services tab. The Secure Services window opens.
5 From the Packages section, select the first package in the Selected list. Scroll to
5 From the Packages section, select the first package in the Selected list. Scroll to
the bottom of the list, hold down the Shift key, and select the last package in the
list to highlight all of the packages in the list.
6 Click Remove. All of the packages move to the Available list.