Cisco PowerKEY CableCARD Module 802 Installation Guide
About This Guide
78-4017672-01 Rev E
xiii
About This Guide
Introduction
This guide provides an overview of the PowerKEY
®
Conditional Access System
(CAS) and describes the PowerKEY
CAS Gateway (PCG) server. Refer to this guide
when installing, operating, and troubleshooting your gateway server.
Purpose
Use the procedures in this document to install the PCG in your RF networks, IP
networks, or hybrid RF/IP networks. Since this document applies to multiple
network types, not all of the procedures in this document will apply to every
network. Use the procedures that apply to your network architecture, and ignore the
ones that do not.
networks, or hybrid RF/IP networks. Since this document applies to multiple
network types, not all of the procedures in this document will apply to every
network. Use the procedures that apply to your network architecture, and ignore the
ones that do not.
Audience
This document is written for system operators. Field service engineers and Cisco®
Services engineers may also find the information in this document helpful.
Services engineers may also find the information in this document helpful.
Conventions
This document applies to one or more of our network-control platforms. These
platforms include, but are not limited to, the Digital Network Control System
(DNCS) and the IPTV Service Delivery System (ISDS). For the purpose of this
document, we will refer to these platforms as DNCS/ISDS.
platforms include, but are not limited to, the Digital Network Control System
(DNCS) and the IPTV Service Delivery System (ISDS). For the purpose of this
document, we will refer to these platforms as DNCS/ISDS.