Cisco PowerKEY CableCARD Module 802 Installation Guide
Chapter 4 PKES Software Installation and Configuration
34
4034718 Rev B
Configure SNMP on the PKES
In this procedure, you will configure the Simple Network Management Protocol
(SNMP) of the PKES.
1 Type service snmpd start and then press Enter to start the snmpd process.
2 Type cd /usr/share/snmp/mibs and then press Enter.
3 Type snmpwalk localhost enterprises.1429 | more and then press Enter. The
(SNMP) of the PKES.
1 Type service snmpd start and then press Enter to start the snmpd process.
2 Type cd /usr/share/snmp/mibs and then press Enter.
3 Type snmpwalk localhost enterprises.1429 | more and then press Enter. The
system displays details of the management information base (MIB) tree using the
default username, pass phrase, etc. that are stored in the
/usr/share/snmp/snmp.conf file.
default username, pass phrase, etc. that are stored in the
/usr/share/snmp/snmp.conf file.
4 Contact your account representative to obtain the Engine ID, the User ID, and
pass phrase information. Use the information you obtain from your account
representative to configure your specific Network Management Server to receive
the SNMP traps from the PKES.
representative to configure your specific Network Management Server to receive
the SNMP traps from the PKES.