Cisco PowerKEY CableCARD Module 802 Technical References
CableCARD/Host ID Diagnostic Screen
78-4015203-01 Rev D
63
CableCARD/Host ID Diagnostic Screen
Introduction
This section provides an overview diagram and field descriptions for the
CableCARD/Host ID diagnostic screen. You can view this screen to identify the
customer service information and hardware identification numbers.
CableCARD/Host ID diagnostic screen. You can view this screen to identify the
customer service information and hardware identification numbers.
Important:
This screen is sometimes referred to as the MMI (man-machine interface
information) screen.
information) screen.
The information that displays in this window is dependent upon how the MMI
information was set up. Because this information can be customized, the content
in your diagnostic screen may vary.
information was set up. Because this information can be customized, the content
in your diagnostic screen may vary.
Performing Tasks
By accessing this diagnostic screen, you can perform the following tasks:
Determine the customer service number you need to start service for an S-Card
module
module
Verify whether or not the host is one- or two-way capable
Screen Components
Example:
Screen Fields and Values
The following table describes the fields and possible values that can appear on the
TV screen when you are reviewing the diagnostic screens. They can be useful for
troubleshooting.
TV screen when you are reviewing the diagnostic screens. They can be useful for
troubleshooting.
Field Names
Description
Possible Values