Cisco Cisco D9859 Advanced Receiver Transcoder Installation Guide
Chapter 4 Front Panel Operation
110
OL-29780-01
TS Output Options
Menu Item
Description
Parameters
Output
Select 1 to configure the ASI
output or select 2 to configure
the MPEG over IP output.
output or select 2 to configure
the MPEG over IP output.
1 or 2
Fixed Output
Sets whether the DPM assigns
new values for all the output
channels and PIDs according to
the options below when you
Resynchronize All.
new values for all the output
channels and PIDs according to
the options below when you
Resynchronize All.
Yes or No
Use Inp
Chan/PMT/PIDs
Chan/PMT/PIDs
Set to Yes to use the input
channel numbers, PMT PID
numbers, and/or ES PID
numbers. Otherwise, set to No
to use the Start channel and
channel Step assigned below.
channel numbers, PMT PID
numbers, and/or ES PID
numbers. Otherwise, set to No
to use the Start channel and
channel Step assigned below.
Yes or No
Start
First PE channel to use if the
Use Inp Chan/PMT/PIDs is set
to No.
Use Inp Chan/PMT/PIDs is set
to No.
1 to 65535 for Use Inp Chan
1 to 8192 for Use Inp PMT/PIDs
Step
Offset of the subsequent PE
channel, PE PMT PID, or first
ES PID of subsequent channel
numbers.
channel, PE PMT PID, or first
ES PID of subsequent channel
numbers.
1 to 65535 for Use Inp Chan
1 to 8192 for Use Inp PMT/PIDs
Use Inp Ord
Set to Yes to assign the ES PID
according to the incoming PMT
order. Otherwise, set to No to
use reserved PIDs defined
below.
according to the incoming PMT
order. Otherwise, set to No to
use reserved PIDs defined
below.
Yes or No
PCR, VID, AUD,
SUBT, VBI, DPI,
MPE, TTX, Data,
LSD, CDT, ETV
SUBT, VBI, DPI,
MPE, TTX, Data,
LSD, CDT, ETV
Set the number of PIDs for the
specified streams in one
channel.
specified streams in one
channel.
1 to 64