Cisco Cisco D9858 Advanced Receiver Transcoder Installation Guide
Setting up Input Information
OL-31087-01
153
Setting up Input Information
Setting up the RF Input
1 From the user interface of the D9858, choose Input > Input Setup. The Input
Setup page is displayed.
2 In the RF Input Selection area, check the Use RF Input check box to activate an
RF input. You can select RF 1 to RF 4.
3 Choose UserCfg from the Input Selection drop-down list to lock to the RF input
set by the user. Choose SW Map to use the orbital position settings to select the
RF input. We recommend that you validate the orbital position for the SW Map
option.
RF input. We recommend that you validate the orbital position for the SW Map
option.
4 Click the Use RF 1, Use RF 2, Use RF 3, or Use RF 4 radio button to select an RF
input to activate.
5 In the Tuning area, enter the current operating downlink frequency used by the
transcoder for tuning the received digital signal in the Downlink Frequency
field. You can enter a value in the range from 0.0 to 15.0 GHz.
field. You can enter a value in the range from 0.0 to 15.0 GHz.