Cisco Cisco D9858 Advanced Receiver Transcoder Installation Guide
Configuring System Settings
OL-31087-01
255
CPLD-5514/CPLD-7109
Software Configurable Programmable Logic Device
version attached to the STi5514/STi7109.
version attached to the STi5514/STi7109.
FP-PIC
Front panel controller version for the D9858
transcoder.
transcoder.
FPGA Type
This is the manufacturer's designation for the FPGA
device on the main board.
device on the main board.
FPGA ID
This is used by the decoder software to determine
what features are available in the FPGA.
what features are available in the FPGA.
The HW Board Versions table displays the revisions, option bits, and serial numbers
of the main board (TMB) and the transcoder board (TXB).
of the main board (TMB) and the transcoder board (TXB).
In the APP/FPGA Downloads area, click Browse to select the new version of FPGA
or the D9858 Advanced Receiver Transcoder’s software application. The Open
dialog opens. Select the upgrade file and click Open. Click Download to download
the selected upgrade file. File formats that can be downloaded include application
CDTs and FPGA CDTs. The State field in the Download Status area displays the
progress of the download. When the download is complete, a Successfully
Completed message is displayed at the top of the Versions page.
or the D9858 Advanced Receiver Transcoder’s software application. The Open
dialog opens. Select the upgrade file and click Open. Click Download to download
the selected upgrade file. File formats that can be downloaded include application
CDTs and FPGA CDTs. The State field in the Download Status area displays the
progress of the download. When the download is complete, a Successfully
Completed message is displayed at the top of the Versions page.
Note: For application downloads, once the download is complete, the D9858
transcoder will reboot automatically. For FPGA downloads, you must click Reboot
Receiver in the Service Actions page (Support > Service Actions) to manually
reboot the D9858 transcoder and complete the download. This is to facilitate the
typical case in which the user intends to flash the FPGA file (no auto reboot)
followed by an APP download (auto reboot).
transcoder will reboot automatically. For FPGA downloads, you must click Reboot
Receiver in the Service Actions page (Support > Service Actions) to manually
reboot the D9858 transcoder and complete the download. This is to facilitate the
typical case in which the user intends to flash the FPGA file (no auto reboot)
followed by an APP download (auto reboot).