Cisco Cisco D9887B HDTV Modular Receiver Installation Guide
Password Strength
4043118 Rev A
203
To enable/disable Not In List password requirement, use the following steps:
1 Press the Menu button.
2 Use the Up and Down buttons to move the cursor to "Pwd Strength," then press
1 Press the Menu button.
2 Use the Up and Down buttons to move the cursor to "Pwd Strength," then press
the Enter button.
3 Use the Up and Down buttons to move the cursor to "Not In List," then press the
Enter button.
4 Use the Up and Down buttons to change the selection, then press the Enter
button to save the selection.