Cisco Cisco D9054 HDTV Encoder Release Notes
Cisco D9054 HDTV Encoder
Software Version 04.02.09 Release
Note
Software Version 04.02.09 Release
Note
Overview
This document describes an improvement and a known issue included in
software release version 04.02.09 for the Cisco
software release version 04.02.09 for the Cisco
®
D9054 HDTV Encoder, since the
previous version 04.02.07.
Improvement
The following improvement is included in this software version 04.02.09:
The handling of one of the signals in the FPGA that crossed multiple clock
boundaries was enhanced.
The handling of one of the signals in the FPGA that crossed multiple clock
boundaries was enhanced.
Known Issue
The following describes a known issue with version 04.02.09:
There is a low possibility that the audio on a Multiple Channel Audio (MCA) card
may mute when the video, with embedded audio, is disconnected and re-
connected to the encoder. You can recover the audio by disabling and re-enabling
the audio, or by disconnecting and re-connecting the SDI source to the encoder.
There is a low possibility that the audio on a Multiple Channel Audio (MCA) card
may mute when the video, with embedded audio, is disconnected and re-
connected to the encoder. You can recover the audio by disabling and re-enabling
the audio, or by disconnecting and re-connecting the SDI source to the encoder.