Cisco 1GHz Surge-Gap Taps, Standard & Full Profile Installation Guide
Mounting the Faceplate
21
Mounting the Faceplate
After mounting the housing and connecting the feeder cables, you are ready to
install the faceplate in the tap housing.
install the faceplate in the tap housing.
To Mount the Faceplate
Follow these steps to attach the faceplate to the housing.
1 If the housing is installed on a strand, go to step 2.
1 If the housing is installed on a strand, go to step 2.
If the housing is installed in a pedestal, go to step 3.
WARNING:
Protect yourself from electric shock and your equipment from damage.
Certain components can deliver an electrical shock.
Protect yourself from electric shock and your equipment from damage.
Certain components can deliver an electrical shock.
2 Attach a grounding wire assembly to the strand wire and a drop port
F-connector.
Proceed to step 4.
3 Attach a grounding wire assembly to the strand clamp bolt on the pedestal and a
drop port F-connector.