Cisco 1GHz Surge-Gap Taps, Standard & Full Profile Installation Guide
Chapter 2 Installing the Tap
36
4013399 Rev C
2 Remove the grounding wire assembly.
3 On the desired port, turn the switch from the “OFF” to “ON” position using a
3 On the desired port, turn the switch from the “OFF” to “ON” position using a
flat-bladed screwdriver. The switches are marked with the port numbers.
WARNING:
Please use extreme caution when turning the switch "ON" and "OFF" to
prevent unwanted AC power transmission on a subscriber loop.
Please use extreme caution when turning the switch "ON" and "OFF" to
prevent unwanted AC power transmission on a subscriber loop.