Cisco 1 GHz Surge-Gap Reverse Window Taps Installation Guide
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Chapter 2 Installing the Tap
26
4014133 Rev D
Installing Optional Modules
The plug-in reverse attenuator module comes in values of 3, 6, 9, and 12 dB. The
reverse attenuator is a plug-in module that can be installed in the field. Refer to
Optional Modules (on page 8) for details.
reverse attenuator is a plug-in module that can be installed in the field. Refer to
Optional Modules (on page 8) for details.
To Install the Reverse Attenuator
Follow these steps to install the reverse attenuator.
1 If the faceplate is mounted in the tap housing, before proceeding, follow the
1 If the faceplate is mounted in the tap housing, before proceeding, follow the
steps in To Remove the Faceplate (on page 16).
2 Select the appropriate reverse attenuator that is to be installed.
3 Locate and remove the jumper module.
3 Locate and remove the jumper module.