Cisco 1GHz Surge-Gap Taps, Standard & Full Profile Installation Guide
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Installing the Feeder Cable
13. Replace the threaded end port plug in any unused ports and torque with a
1/2-in. or 3/8-in. wrench from 30 in-lb to 50 in-lb (3.4 Nm to 5.6 Nm).
14. Slide the pre-cut piece of weatherproofing material over the connector and the
lip of the entry port.
Note: Follow the manufacturer’s recommended procedure for sealing.
Note: Follow the manufacturer’s recommended procedure for sealing.
15. Repeat for the other cable connector(s).
OL-31976-01
27