Cisco Cisco Surge-Gap Passives Installation Guide
Installing the Feeder Cable
13. Replace the threaded end port plug in any unused ports and torque with a
1/2-in. or 3/8-in. wrench from 30 in-lb to 50 in-lb (3.4 Nm to 5.6 Nm).
14. Slide the pre-cut piece of weatherproofing material over the connector and the
lip of the entry port.
Note: Follow the manufacturer’s recommended procedure for sealing.
Note: Follow the manufacturer’s recommended procedure for sealing.
15. Repeat for the other cable connector(s).
OL-31976-01
27