Cisco Cisco Internet Streamer Application Release Notes
10
Release Notes for Cisco Internet Streamer CDS 2.5.7
OL-20688-02
Open Caveats
Symptom:
The Flash Media Streaming processes take 100 percent of the CPU usage after changing the local
time or possibly a negative NTP change. Mostly this would occur when the SE is reloaded.
time or possibly a negative NTP change. Mostly this would occur when the SE is reloaded.
Condition:
The fmsadmin process and fmsedge process is at 100 percent of the CPU after the SE reloads.
Workaround:
Restart Flash Media Streaming resolves this issue.
•
CSCtf94686
Symptom:
Cache miss request fails to stream, when the virtual application path map is configured. But the
same request next click works fine, because it is cache hit.
same request next click works fine, because it is cache hit.
Condition:
During the cache miss request, when the virtual application path map is configured, virtual path map
is applied to cache fill requests. But the following HTTP range requests are still sent without the
virtual path map, which results in the origin server replying with a 404 error message and the Flash
Media Streaming cache miss request failing.
is applied to cache fill requests. But the following HTTP range requests are still sent without the
virtual path map, which results in the origin server replying with a 404 error message and the Flash
Media Streaming cache miss request failing.
Workaround:
Do not use the virtual map command or create a vod folder case on the origin server.
CDSM
•
CSCtb82518
Symptom:
In the Services > Service Definition> Delivery Services> Replication Status page, the replication
status switches between "No Status Reported" and "Completed" even if the replicating is finished.
status switches between "No Status Reported" and "Completed" even if the replicating is finished.
Condition:
The interval for the replication status reporting between the CDSM and SE is not consistent.
Workaround:
Need to reconfigure the interval for the replication status reporting. In the CDSM GUI, choose
System > Configuration > System Properties, edit System.repstatus.updateRateSec, change the
current value to another one, and click Submit. This should stabilize the interval between the CDSM
and the SEs.
System > Configuration > System Properties, edit System.repstatus.updateRateSec, change the
current value to another one, and click Submit. This should stabilize the interval between the CDSM
and the SEs.
•
CSCtf61997
Symptom:
On an SE, the delivery service related information stored in the /state/perdsvc.xml file cannot be
removed as expected even if the SE is deregistered from the CDSM.
removed as expected even if the SE is deregistered from the CDSM.
Condition:
If the SE is assigned as the Content Acquirer of any delivery service, the perdsvc.xml file is not
changed after the SE deregistered.
changed after the SE deregistered.
Workaround: