Cisco Cisco Internet Streamer Application Release Notes

Conditions:

Enter the show running-config command, displays two port channels configured on the device and 
the show service-router service-monitor command displays disk failure count threshold enabled.

CSCtf81925

Symptoms:

When removing port channel load-balance at by using the no portchannel load-balance command, 
default-gateway route is removed and impacts network connectivity.

When using the CDSM to change the port channel load balance it may not occur.

CSCtf01052

Symptom:

After upgrading from Release 2.4.x to Release 2.5.3, static routes may be lost.

Condition:

Upgrade from Release 2.4.x to Release 2.5.3.

CSCte76934

Symptom:

Static IP routes are appended with interface x.0.0.0 after upgrading from Release 2.4.x to Release 
2.5.1 or Release 2.5.3.

Condition:

This only happens when you have existing static IP routes configured and you upgrade to Release 
2.5.1 or Release 2.5.3.

CSCte05421

Symptom:

Network connectivity is intermittent. Use the show ip route command to verify the routes. All 
default gateway and IP routes are listed.

Condition:

The port-channel load-balance command toggles the interface down and up, and causes the Linux 
OS to remove the route table for each interface. Restoration of the route tables is not handled 
properly by the CLI. Sometimes this command is sent by the CDSM when the device is registering 
to the CDSM.

CSCtf94980

Symptom:

MP3 live streaming fails.

Condition:

Because Shoutcast does not have content length or transfer encoding as part of its headers, the 
connection to the origin server is closed after reading the headers.