Cisco Cisco Compact EGC Segmentable Node A90200

Page of 48
xi 
Preface 
62-7023683-01 Rev A 
Preface 
About This Guide 
Introduction 
The Cisco
®
 Enhanced Digital Return (EDR) 85 System expands the functionality of 
Compact Segmentable Nodes by increasing the performance, reach, and efficiency of 
the reverse path transmissions. 
Note: The Compact Segmentable Node A90200 supports EDR transmitter since its 
firmware release 2.00.04. Refer to the release note of the node A90201 for EDR 
transmitter compatibility before installation. Damage may be cause when an EDR 
transmitter module is installed on an incompatible device.   
Purpose 
This guide provides instructions for installing, configuring, setting up, and 
troubleshooting the transmitter. 
Who Should Use This Document 
This document is intended for authorized service personnel who have experience 
working with similar equipment. The service personnel should have appropriate 
background and knowledge to complete the procedures described in this document. 
Qualified Personnel 
  CAUTION: 
Allow only qualified and skilled personnel to install, operate, maintain, and 
service this product. Otherwise, personal injury or equipment damage may 
occur. 
Only appropriately qualified and skilled personnel should attempt to install, 
operate, maintain, and service this product. 
Scope 
This guide discusses the following topics.  
 
Description 
 
Installation 
 
Operation 
 
Troubleshooting  
 
Customer Support Information 
Document Version 
This is the first release of this guide (Rev A).