Cisco Cisco Content Delivery Engine 220 Installation Guide
5-3
思科内容交付引擎 205/220/250/420/460/470 硬件安装指南
OL-16887-11
第 5 安装 TV CDS 软件并进行 CDE 的初始配置 章
安装并配置 TV CDS 软件
Installing ISA-specific files (existing files backed up to .file)
ISA installation complete
Starting fixperms.sh
Loading File List
Processing File List
Ending fixperms.sh
Unmounting /mnt/cdrom
inst.sh completed, removing .iso image
./cdsinstall: line 203: ./inst.sh: No such file or directory
步骤 8 请输入下列命令来配置 CDS:
[root]# cdsconfig
您应当会看到类似内容:
Please ensure an IP address and netmask are configured for
management interface eth0:
Select an option or an interface to re-configure/disable:
1. eth0 ip:172.22.99.237 mask:255.255.254.0 bcast:172.22.99.255
2. Configure another interface
3. Done
Choice [3]:
步骤 9 输入 1 并按 Enter 键。
步骤 10 页面会询问您是否要禁用接口 eth0。输入 N 表示 “否”并按 Enter 键。
步骤 11 根据提示输入 eth0 的 IP 地址。
步骤 12 根据提示输入 eth0 的子网。
步骤 13 根据提示输入 eth0 的广播地址。您应当会看到类似内容:
Select an option or an interface to re-configure/disable:
1. eth0 ip:172.22.99.238 mask:255.255.254.0 bcast:172.22.99.255
2. Configure another interface
3. Done
Choice [3]:
步骤 14 输入 2 以配置另一个接口或输入 3 完成此步骤并按 Enter 键。您应当会看到类似内容:
Backing up old scripts in /etc/sysconfig/network-scripts
Writing new ifcfg-ethX scripts
步骤 15 根据提示输入主机名。
步骤 16 根据提示输入连接到网关的以太网接口数量。
步骤 17 根据提示输入默认网关 IP 地址。您应当会看到类似内容:
Backing up /etc/sysconfig/network
Writing new /etc/sysconfig/network
Backing up /etc/hosts
Writing new /etc/hosts
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
PCI: Enabling device 0000:0e:00.0 (0000 -> 0003)
PCI: Enabling device 0000:0e:00.1 (0000 -> 0003)
Restarting network services, this may take a minute:
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Network services restarted; may take a few seconds to establish connectivity
Reboot for hostname changes to take effect