Cisco Cisco Compact EGC Segmentable Node A90200 Data Sheet
Data Sheet
© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 8
Compact EGC Fiber Deep Nodes A90100 and A90300
The Compact EGC Fiber Deep Node (FDN) is a small node designed to meet the
growing needs for network segmentation. It provides advanced features and benefits, at
an attractive price point, helps operators reduce operating costs by streamlining node
segmentation deployments and configuration, and is well suited for migration toward
FTTC/FTTB architectures.
The node can operate at an output level of 117 dB
μV in the forward path and can be configured
electronically for quick initial setup or adjustments that arise as network requirements shift. All
settings can be done without interrupting service, an especially important capability in networks that
are delivering interactive services such as Voice over IP (VoIP) and high-speed data. The node is
equipped with an interface that allows configuration through a handheld programmer terminal or by
connecting to a standard PC. This interface allows the settings to be stored and reapplied for
maintaining a streamlined configuration.
The node’s large optical input range and high RF output level provide flexible options for use with a
large variety of reverse transmitters to support a variety of applications within the network.
The number of plug-ins has been minimized to help operators keep inventory and costs down. The
full range electronic attenuators and equalizers offer improved versatility and make it possible to
achieve the same adjustment range as with conventional plug-ins or potentiometer solutions. A
plug-in diplexer filter is used to determine the forward/reverse band split.
To meet future demands for more bandwidth, the node offers an electronic 862 MHz to 1 GHz field-
programmable bandwidth extension, and the reverse path that can be upgraded to 200 MHz.
The Compact EGC FDN Model A90100 and A90300 can be configured with a Cisco status
monitoring transponder (SMC or HMS) to enable remote monitoring of critical node parameters and
remote control of the built-in 3-state reverse switch. All node settings are remotely addressable via
ROSA® Element Management System to help reduce truck rolls and associated cost.