Cisco Cisco AnyRes Live 5300 Leaflet
Schedule Encoding Channel Restarts with
AnyResLive Encoder API
AnyResLive Encoder API
Document ID: 119018
Contributed by Kurt Ma and Frank Vercant, Cisco TAC Engineers.
Aug 05, 2015
Aug 05, 2015
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Configure
Verify
Troubleshoot
Prerequisites
Requirements
Components Used
Background Information
Configure
Verify
Troubleshoot
Introduction
This document describes how to schedule regular restarts of the encoding channel with Cisco AnyResLive.
Prerequisites
Requirements
Cisco requires that you have:
Administrator access to the Cisco AnyResLive Encoder
•
Knowledge of how batch files and scripts work on Microsoft Windows
•
Components Used
The information in this document is based on these software and hardware versions:
Wget for Windows
•
Windows batch script
•
Windows Task Scheduler
•
Spinnaker Message Service API
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.