Cisco Cisco Digital Service Access Node (DSAN) 8210 Installation Guide
Viewing CLI POST and Boot Results
78-4041038-01 Rev B
75
Field Name
Description
Last Boot Type
Displays one of the following values:
UnknownReboot
DavicChange *
UserReboot *
SystemReboot
TrapReboot - usually indicates a software error
SilentReboot - usually indicates a software error
BootLdrReboot - usually indicates a hardware failure
PowerUpReboot
CodeChange *
HardwareReset
WatchdogInterrupt
Note: Values marked with * are not usually displayed in
the field.
the field.
Secure Micro
Displays Pass or Fail, or N/A if the test has not executed
Reverse Wink Switch
Displays one of the following values indicating the state of
the reverse wink switch:
the reverse wink switch:
Low
Padded (-6 dB)
Off
Basic Navigation
From this screen, you can:
Press Enter to redraw the screen and update its information.
Type p and then press Enter to go to the Page 1.0 diagnostic screen.
Type n and then press Enter to go to the Page 3.0 diagnostic screen.
Type x and then press Enter to exit and return to the DSAN> prompt.
At the >>> prompt, type any screen number decimal format (e.g., 3.0) and then
press Enter to go directly to that screen.
press Enter to go directly to that screen.