Cisco Cisco Digital Service Access Node (DSAN) 8211 Installation Guide
Viewing EAS Status
OL-29938-01
107
Field Name
Description
Source ID
Details channel source ID specified in the SCTE-18 message
Note: This applies only to Out-of-Band EAS, which is not
used in the DSAN 8211. These will report as 0.
used in the DSAN 8211. These will report as 0.
Maj:Min Ch
Major and Minor channel numbers for the force tune
details channel
details channel
Exception Channels
List of channels excluded from the force tune specified in
the SCTE-18 message. These are in the form of:
the SCTE-18 message. These are in the form of:
Source ID:Major Channel:Minor Channel
Note: In the DSAN 8211, only major and minor channel
numbers are populated for in-band EAS messages. Source
ID will report as 0.
numbers are populated for in-band EAS messages. Source
ID will report as 0.
Basic Navigation
From this screen, you can:
Press Enter to redraw the screen and update its information.
Type p and then press Enter to go to the Page 13.0 diagnostic screen.
Type n and then press Enter to go to the Page 15.0 diagnostic screen.
Type x and then press Enter to exit and return to the DSAN> prompt.
At the >>> prompt, type any screen number decimal format (e.g., 3.0) and then
press Enter to go directly to that screen.
press Enter to go directly to that screen.