Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Data Sheet

 

8

 
 

 
The GainMaker Node is available in a wide variety of configurations.  The GainMaker Ordering Matrix provides 
ordering information for configured node stations, existing amp to node upgrade kits, and launch amplifiers.  This 
page contains ordering information for required and optional accessories.  Please consult with your Account 
Representative, Customer Service Representative, or Applications Engineer to determine the best configuration 
for your particular application. 
 

Required Accessories for RF Module 

Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20 dB 

• 

1 required for forward input  

• 

1 required for AGC, if applicable* 

• 

4 required for reverse (3 input, 1 output) 

*To determine AGC pad value, subtract 34dB from the design value main port RF output 
level at the AGC pilot frequency. 

589693 (0 dB) 

sequentially thru 

589734 (20.5dB) 

Plug-in Forward Equalizer - Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz 

• 

1 required for forward input 

4007228 (0 dB) 

sequentially thru 

4007248 (30 dB) 

Plug-in Reverse Equalizer - Available in 1 dB steps from 0 to 12 dB at 40 MHz 

• 

1 required for reverse output - unless design value is 0 dB (0 dB EQ is provided) 

712719 (0 dB) and 589628 

(1 dB) sequentially thru 

589639 (12 dB) 

Plug-In Signal Director for Auxiliary output – 1 required, choose from below: 
• Jumper 

• 2-way 

Splitter 

• 

DC-8 Directional Coupler 

• 

DC-12 Directional Coupler 

 

4008208 
4008364 
4008365 
4008366 

 
 

Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20.5 dB 
• 

1 ea required for Transmitter and Receiver(s). 

279500 (0 dB)sequentially thru 
279513 (13 dB) in 1 dB steps 

 

504151 (14 dB) sequentially 
thru 504157 (20 dB) in 1 dB 
steps 

 

565231 (0.5 dB) sequentially 
thru 565251 (20.5 dB) in 1 dB 
steps