Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Data Sheet
GainMaker Node – 5-40/52-1002 MHz with RF Redundancy
8
Specifications, continued
Electrical
Units
Notes
Max. AC Through Current (continuous)
Amps
15
Max. AC Through Current (surge)
Amps
25
Component DC Power Consumption (typical)
@ +24 VDC
@ +15 VDC
@ -6 VDC
1
Launch Amplifier HGBT (thermal)
Amps 1.51
-
-
Standard Optical Receiver Amps
0.25
0.01
0.035
Reverse Transmitter – Standard FP
Amps
0.14
-
0.07
Reverse Transmitter – Standard DFB
Amps
0.14
-
0.09
Power Supply DC Current Rating
Amps
3.0
0.05
0.3
1
Station Powering Data
AC Voltage
GainMaker HGBT
Node
I
DC
(Amps at
24 V DC)
90
85
80
75
70
65
60
55
50
45
40
AC
Current
(A) 0.98 1.02 1.01 1.05 1.09 1.16 1.32 1.41 1.54 1.71 1.93
1 RX, 1 TX,
& Stat Mon
2.5
Power
(W)
70.8 70.7 70.5 70.4 70.2 70.2 70.4 70.4 70.4 70.6 70.8
Data is based on stations configured for 2-way operation with status monitoring transponder. AC currents specified are based on
measurements made with typical CATV type ferro-resonant AC power supply (quasi-square wave), and standard version DC power
supply.
DC supply has a user configurable 40 V or 50 V AC under-voltage lockout circuit.
Note:
1.
The total DC Power consumption of installed components should not exceed the power supply DC current rating.
Environmental
Units
Operating Temperature Range
degrees
-40
°F to 140°F (-40°C to 60°C)
Relative Humidity Range
percent
5% to 95%
Mechanical
Housing Dimensions
Weight
Station with 1 RX, 1 TX, & power supply: 22 lbs (9.9 kg)
Station with 1 RX, 1 TX, & power supply: 22 lbs (9.9 kg)
17.5 in. L x 7.3 in. H x 7.5 in. D
(445 mm L x 185 mm H x 191 mm D)
(445 mm L x 185 mm H x 191 mm D)
Unless otherwise noted, specifications reflect typical performance and are referenced to 68
°F (20°C). Specifications are based
upon measurements made in accordance with SCTE/ANSI standards (where applicable), using standard frequency assignments.