Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Installation Guide
Connecting the Fiber Optic Service Cable to the Node
4 Screw the main nut into the fiber entry port and torque from 20 ft-lb to 25 ft-lb
(27.1 Nm to 33.9 Nm).
5 Push the fiber sleeve back into the main nut.
6 Screw the rotational nut back onto the main nut and torque from 20 ft-lb to 25
6 Screw the rotational nut back onto the main nut and torque from 20 ft-lb to 25
ft-lb (27.1 to 33.9 Nm).
7 Secure the setscrews on the main nut per recommended instructions supplied
with the fiber optic service cable.
8 Use heat shrink to seal as required.
9 Proceed to
9 Proceed to
Attaching the Fiber Connectors (on page 24).
OL-30326-02
23