Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Installation Guide
Forward Path Balancing for AGC Stations Using Thermal Setup Mode
AGC pad.
To Select the AGC Pad Value
1 Use the following formula to determine the correct AGC pad value for the High
Gain Dual and Balanced Triple.
AGC pad value = RF output level at pilot frequency (main output port) - 34
dB
2 After finding the correct AGC pad value, install it in the amplifier in the AGC
pad slot. The preceding AGC setup illustration also shows the location of the
AGC pad.
3 Proceed to To Align the AGC Module.
To Align the AGC Module
Complete the following steps to align the AGC module.
1 Make sure that switch S1 is set to position 1.
1 Make sure that switch S1 is set to position 1.
OL-30326-02
65