Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Installation Guide
EDR Digital Return Multiplexing Applications
2 Close the bale-clasp before inserting the OPM module.
3 Line up the OPM module with the port, and slide it into the port.
4 Connect the LC/PC to SC/AC fiber jumper to the OPM module.
5 Proceed to next section for installation.
6 The following diagram shows the OPM module installed on the 1:1 transmitter
4 Connect the LC/PC to SC/AC fiber jumper to the OPM module.
5 Proceed to next section for installation.
6 The following diagram shows the OPM module installed on the 1:1 transmitter
module.
The following diagram shows the OPM module installed on the transmitter module
of the GainMaker 4-Port Node.
CAUTION:
Removing and installing an OPM module can shorten its useful life. Do not remove
and insert OPM modules more often than is absolutely necessary.
130
OL-29644-03