Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Technical References
Closing the Housing,
Continued
3.
Use a torque wrench with a 1/2-in. socket to tighten each closure bolt from
5 ft-lb to 12 ft-lb (6.8 Nm to 16.3 Nm) each.
Note: Ensure that any test point plugs are tightened from 2 ft-lb to 4 ft-lb
(2.7 Nm to 5.4 Nm).
Important: Follow this numbered sequence to tighten the closure bolts.
Important: Follow this numbered sequence to tighten the closure bolts.
If You Have Questions
If you have technical questions, call Cisco Services for assistance. Follow the menu
options to speak with a service engineer.
Cisco Systems, Inc.
5030 Sugarloaf Parkway, Box 465447
Lawrenceville, GA 30042
678 277-1120
800 722-2009
www.cisco.com
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates
in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
Third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any
other company. (1110R)
Product and service availability are subject to change without notice.
© 1999, 2008, 2012 Cisco and/or its affiliates. All rights reserved.
Product and service availability are subject to change without notice.
© 1999, 2008, 2012 Cisco and/or its affiliates. All rights reserved.
February 2013 Printed in USA
Part Number
78-715125-01 Rev E