Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Technical References

Page of 2
 
GainMaker System Amplifier and Surge Protector Compatibility 
Technical Bulletin 
Overview 
Introduction 
We is advising customers of the potential for signal response variations when using 
plug-in surge protector, part number 467351, in GainMaker™ System Amplifiers. 
The Situation 
We have determined that there is a possibility the RF signal response can be 
adversely affected when a plug-in surge protector, part number 467351, is installed 
in the GainMaker System Amplifier.  It appears that in some cases the surge 
protector could cause an RF response variation from 0.1 dB up to a maximum of 
approximately 1.0 dB.  The variation appears as a dip in the frequency response, and 
may appear somewhere between the frequency range of 820 MHz to 870 MHz. 
The Solution 
We have changed the design of the surge protector for the GainMaker System 
Amplifier.  The new part number is 715973.  We will accept an In Warranty 
Exchange (IWE) for the surge protector, part number 467351.  If you have any of 
these units and wish to exchange them, please contact your Customer Service 
Coordinator at 1-800-722-2009 to arrange for an IWE.