Cisco Optical Hub and Hub-Node Installation Guide
Model GS7000 Node Expanded Fiber
Tray Installation Instructions
Tray Installation Instructions
Overview
Introduction
The expanded fiber tray is an optional replacement for the standard fiber tray in
the Model GS7000 GainMaker
®
Scaleable 4-Port Node. The expanded fiber tray
provides additional space for fiber management/storage and the installation of
additional bulkhead adaptors. The expanded fiber tray also provides the space
for the installation of various passive devices such as CWDM and OADM
cassettes and raw WDM cartridges.
Audience
These installation instructions are intended for all cable system operators or
installers who operate and configure a Model GS7000 Node. For complete
instructions on using the node refer to Model GS7000 GainMaker Scaleable 4-Port
Node Installation and Operation Guide, part number 4013584.
Qualified Personnel
Only appropriately qualified and skilled service personnel should attempt to
install, operate, maintain, and service this product.
WARNING:
Allow only qualified and skilled personnel to install, operate, maintain, and
Allow only qualified and skilled personnel to install, operate, maintain, and
service this product. Otherwise, personal injury or equipment damage may
occur.
Features
The expanded fiber tray provides the following features:
Design allows for configuration flexibility.
Built-in fiber guides and tabs aid management of slack fiber and maintenance
of minimum bend radiuses.
Accommodates most commercially available optical passive devices.