Cisco Model D-PCG1000 PowerKEY CAS Gateway
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Chapter 1 Set Up GQI-Based QAMs on the EC
18
OL-31281-01
Field
Description
Source Type
Shows the Source Type of the source:
¡
2D
¡
3D
¡
SD
¡
HD
¡
MPEG2
¡
MPEG4
Current Security Mode
Shows the security mode of the source:
¡
Clear
¡
Encrypted
Source Settings
This section discusses the source settings for several different types of sources.
Multicast Through GQI-Based QAM Settings
Use the following fields when you manage multicast digital sessions through GQI-
based QAMs in the Application Server.
based QAMs in the Application Server.
Field
Description
Source ID
Select the session ID this multicast will use.
Session ID
Displays the source ID of the session you are editing.
Bandwidth
(Mbps)
The maximum amount of bandwidth (in Mbps) that the system should
allow for this session.
Valid range: From 0 to 38.8 Mbps.
QAM Name
Select the GQI-based QAM you are using for this multicast session.
Ethernet Port
Select the Ethernet port of the QAM you selected.
Output Carrier
Select the output carrier of the QAM.
Program Number The MPEG program number of the input.
Valid range: From 0 to 65535.
Source IP
Address 1
Address 1
The IP address of the device sending content to the GQI-based QAM.
Source IP
Address 2
The IP address of the second device sending content to the GQI-based
QAM (if used).
Source IP
Address 3
Address 3
The IP address of the third device sending content to the GQI-based QAM
(if used).
(if used).