Cisco Model D-PCG1000 PowerKEY CAS Gateway
Changing Device Settings
OL-31281-01
27
Result: The Device Information page is displayed.
2 In the Device Name field, enter the device name (up to 16 characters supported).
3 Click Apply.
4 Click Save.
3 Click Apply.
4 Click Save.
Configuring the Annex
The annex setting applies to all carriers in the RF Gateway 1, including ITU-A
(DVB), ITU-B (open cable), or ITU-C (Japan applications). Mixed annex settings are
not supported.
(DVB), ITU-B (open cable), or ITU-C (Japan applications). Mixed annex settings are
not supported.
To Configure the Annex
1 Navigate to the System/System Configuration page.
1 Navigate to the System/System Configuration page.