Cisco Headend Digital Broadband Delivery System

 

8 

4011411 Rev B 

4  Click File, and then select Open. The Set Up Display Channel Map window 

opens for the channel map you selected. 

 

 

5  Scroll through the Available Services field until you see the DVR service listed, 

and then click the DVR service to select it. 

6  Scroll through the Channel Slot field until you see the channel slot to which you 

want to assign the DVR service, and then click the channel slot to select it. 

7  Click Add. The DVR service moves from the Available Services field to the 

Channel Slot field you selected. 

8  Click Save to save the channel map information in the DNCS database and close 

the Set Up Display Channel Map window. By default, the system waits 20 

minutes to build new channel maps. However, the amount of time that elapses 

between a change to a channel map and the time that a new channel map is built 

and broadcast to DHCTs varies according to the SAM Update Timer setting. For 

this reason, allow an appropriate amount of time to pass before testing DVR 

service to verify that channels were added. 

9  Repeat steps 3 to 8 for each channel map that requires DVR service, and then go 

to step 10.